RB951G-2HnD

  • $79.95

  • Ex Tax: $79.95
  • Availability:Out Of Stock
  • Product Code: RB951G-2HnD


RB951G-2HnD

The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM - 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided.

Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.

Product specifications

Details
Product codeRB951G-2HnD
CPU nominal frequency600 MHz
CPU core count1
Size of RAM128 MB
10/100/1000 Ethernet ports5
Wireless chip modelAR9344
Wireless standards802.11b/g/n
Number of USB ports1
Power Jack1
PoE inYes
Supported input voltage9 V - 30 V
Dimensions113x138x29mm
Operating SystemRouterOS
Tested ambient temperature-20C .. +50C
License level4
Antenna gain DBI2.5
CPUAR9344
Max Power consumptionUp to 7W
USB slot typeUSB type A
Number of chains2
Storage typeNAND
Storage size128 MB
Suggested price$79.95

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s30-961000
54MBit/s25-80316
MCS030-961000
MCS723-78200

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RB951G-2HnDAR9344 1G all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)81.0983.7232.0950.3269.6138.0
Bridging25 bridge filter rules81.0983.786.0352.387.644.9
Routingnone (fast path)81.0983.7210.0860.2226.9116.2
Routing25 simple queues81.0983.7103.9425.6106.654.6
Routing25 ip filter rules56.8689.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results