• $495.00

  • Ex Tax: $495.00
  • Availability:Out Of Stock
  • Product Code: CCR1009-8G-1S-1S+


The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU.

CCR1009-8G-1S-1S+ comes with 2GB of RAM, eight Gigabit Ethernet ports (Ether1-4 are in a Switch group), one SFP port and one SFP+ port with 10G support (SFP module not included).

CCR1009-8G-1S-1S+ model have dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).

Also, CCR1009-8G-1S-1S+ supports a Smart card, to store your private key for use in all features that support Certificate based authentication.

SFP+ port supports SFP (1.25G) modules as well.

Product specifications

Product codeCCR1009-8G-1S-1S+
CPU nominal frequency1.2 GHz
CPU core count9
Size of RAM2 GB
10/100/1000 Ethernet ports8
Number of USB ports1
Power Jack2
PoE inYes
Supported input voltage14 V - 57 V
Voltage MonitorYes
CPU temperature monitorYes
PCB temperature monitorYes
Operating SystemRouterOS
Tested ambient temperature-20C .. +60C
License level6
Current MonitorYes
Max Power consumption35W
SFP ports1
SFP+ ports1
USB slot typemicroUSB type AB
Serial portRS232 + Header
Storage typeNAND
Storage size128 MB
Suggested price$495.00

Included parts

Ethernet test results

CCR1009-8G-1S-1S+Tile 9 core all port test with SFP+
ModeConfiguration1518 byte512 byte64 byte
Bridgingnone (fast path)974.011,828.32,817.011,538.410,491.15,371.4
Bridging25 bridge filter rules974.011,828.31,390.05,693.41,447.6741.2
Routingnone (fast path)974.011,828.32,817.011,538.48,217.14,207.2
Routing25 simple queues974.011,828.31,803.07,385.11,947.2997.0
Routing25 ip filter rules680.48,262.8870.13,563.9878.7449.9
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results