hAP ac lite

  • $49.95

  • Ex Tax: $49.95
  • Availability:Out Of Stock
  • Product Code: hAP-ac-lite


hAP ac lite

The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.

Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

We have two versions available - RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range.

Product specifications

Details
Product codeRB952Ui-5ac2nD
CPU nominal frequency650 MHz
CPU core count1
Size of RAM64 MB
10/100 Ethernet ports5
Wireless chip modelQCA9887
Wireless standards802.11a/n/ac
Secondary wireless standards802.11b/g/n
Secondary wireless chip modelQCA9531
Number of USB ports1
Power Jack1
PoE inYes
PoE outYes
Supported input voltage10 V - 30 V
Dimensions113 x 89 x 28mm
Operating SystemRouterOS
Tested ambient temperature-30 + 70 C
License level4
Antenna gain DBI2
CPUQCA9531
Max Power consumption8W
USB slot typeUSB type A
Number of chains1
Storage typeFLASH
Storage size16 MB
Suggested price$49.95

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s23-93200
54MBit/s20-75100
MCS023-93200
MCS719-7179
MCS916-6340

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RB952Ui-5ac2nDQCA9531 (650Mhz) 100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)40.6493.0117.4480.9217.0111.1
Bridging25 bridge filter rules40.6493.070.1287.170.936.3
Routingnone (fast path)40.6493.0117.4480.9200.8102.8
Routing25 simple queues40.6493.079.6326.090.846.5
Routing25 ip filter rules40.6493.042.2172.843.222.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results