OmniTIK 5

  • $89.00

  • Ex Tax: $89.00
  • Availability:Out Of Stock
  • Product Code: OmniTIK-5


OmniTIK 5

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

Product specifications

Details
Product codeRBOmniTikU-5HnD
CPU nominal frequency600 MHz
CPU core count1
ArchitectureMIPS-BE
Size of RAM64 MB
10/100 Ethernet ports5
Wireless chip modelAR9344
Wireless standards802.11a/n
Number of USB ports1
Supported input voltage11 V - 30 V
PoE inYes
Dimensions368x125x55mm
Operating SystemRouterOS v5 and above
Tested ambient temperature-30 .. +70C
License level4
Antenna gain DBI7.5
CPUAR9344
Max Power consumption11W
USB slot typeUSB type A
USB Power ResetYes
Number of chains2
Storage typeFLASH
Storage size16 MB
Suggested price$89.00

Wireless specifications

5 GHz
Transmit power (dBm)Receive SensitivityTransmit power (mW)
6MBit/s30-961000
54MBit/s27-78501
MCS030-961000
MCS726-75398

wireless parameters may be limited in software, depending on your local regulatory limitations

Included parts

Ethernet test results

RBOmniTikU-5HnDAR9344 100M all port test
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Bridgingnone (fast path)40.0485.8116.5477.2269.6138.0
Bridging25 bridge filter rules40.0485.886.0352.387.644.9
Routingnone (fast path)40.0485.8116.5477.2226.9116.2
Routing25 simple queues40.0485.8103.9425.6106.654.6
Routing25 ip filter rules40.0485.859.6244.160.531.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results