Ubiquiti · UniFi Integrations
UPS 2U Pro
SKU: UPS-2U-Pro
Pricing by quoteCall for Availability
UniFi-managed 1.92kVA rackmount UPS with pure sine wave output, 8 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 960W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices. Requires:
Need help with this product?
Call us at 888-NET-FIX-8
Specifications
Mechanical
- Dimensions
- 442.4 x 87.4 x 630 mm; (17.4 x 3.4 x 24.8")
- Weight
- 32 kg (70.5 lb)
- Enclosure Material
- Galvanized steel
- Form Factor
- Rack mount (2U)
- Weatherproofing
- IP20
Hardware
- Management
- Ethernet
- Networking Interface
- (1) 100/10 MbE port for network connection; (2) GbE ports for surge in/out
- Power
- (1) OVC II AC in: NEMA 5‑20P; (8) Battery backup/surge protection: NEMA 5‑20R (Outlets are individually resettable)
- Capacity
- 1920VA/1920W
- Type
- Line interactive
- Input Voltage Range
- 89–145V AC
- Power Method
- (1) TN system, 120V AC, 16A Max., 50/60 Hz
- Nominal Input Voltage
- 120V AC
- Output Voltage
- 120V AC
- Nominal Output Voltage
- 120V AC
- Frequency Range
- AC mode: 50/60 Hz ±5 Hz (Auto sensing); Battery mode: 60 Hz ±1 Hz
- AC Voltage Regulation
- ±1.5% (Battery mode)
- Transfer Time
- 6 ms typical; 10 ms max. (Battery mode)
- Wave Form
- Pure sine wave (Battery mode)
- Battery Type
- (1) Lead Acid 72V, 10Ah
- Runtime
- Full load: 9 min; Half load: 22 min
- Battery Charging Time
- 8 hours recovery to 90% capacity
- Overload at On-Line Mode
- 103–120% 5 min go to fault; 120–150% 10 sec go to fault; 150% 1 sec go to fault
- Overload at Battery Mode
- 103–120% 1 min go to fault; 120–150% 10 sec go to fault; 150% 0.5 sec go to fault
- Short Circuit Protection at On-Line Mode
- Breaker, 250V AC, 20A
- Emergency Power Off (EPO)
- Yes
- Display
- 3.7” touchscreen
- Buttons
- (1) Power; (1) Factory reset; (1) Circuit breaker
- LEDs (Status)
- Off: device not turned on; Flashing white: initializing / factory default; Steady white: waiting for adoption; Steady blue: device adoption and working; Flashing blue: battery mode; Alternating white/blue: firmware upgrading; Rapid flashing blue: locate; Steady red: warning; Flashing red: low battery
- LEDs (Ethernet)
- Yes
- Operating Altitude
- 3,000 m (1.9 mi)
- Operating Environment
- Pollution Degree 2
- Ambient Storage Temperature
- -15 to 50° C (5 to 122° F)
- Ambient Operating Temperature
- 0 to 40° C (32 to 104° F)
- Ambient Operating Humidity
- 0 to 95% noncondensing
- NDAA Compliant
- Yes
- Certifications
- FCC, IC, UL 1778, CSA C22.2 No. 107.3
Software
- Application Requirements (Mobile Apps)
- iOS™: Version 10.36.1 and later; Android™: Version 10.39.3 and later
- Application Requirements (UniFi Network)
- Version 10.5.67 and later
