QNAP · NAS & Network Storage
ES1686Adc
SKU: ES1686ADC
Pricing by quoteCall for Availability
Downtime and forklift upgrades are the two costs that enterprise storage budgets rarely account for. The ES1686Adc is a 3U 16-bay high availability (HA) storage array built to remove both. Two Active-Active controllers process I/O simultaneously and take over for one another transparently, keeping SMB/NFS file services and iSCSI / Fibre Channel block services online through component failure and planned maintenance.
- Enterprise high availability storage that evolves from SAS to NVMe — keep services online today, unlock PCIe Gen4 performance whenever you are ready, in the same system
Need help with this product?
Call us at 888-NET-FIX-8
- Members only
Silarius
In stock
Sign in to view partner prices & stock
Partner store links are available to HexStar account holders. It's free.
- Partner stores are independent retailers. Prices, stock and shipping are set by each store.
Specifications
Hardware (ES1686Adc-2142IT-128G)
- Number of Controller Module
- 2
- CPU
- Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller
- CPU Architecture
- 64-bit x86
- Encryption Engine
- (AES-NI)
- System Memory
- 64 GB RDIMM DDR4 ECC per controller
- Maximum Memory
- 1024GB (16 x 64GB) 512 GB (8 x 64GB) per controller
- Memory Slot
- 16 x R-DIMM/LR-DIMM DDR4 8 x R-DIMM/LR-DIMM DDR4 per controller IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use Registered DIMM (RDIMM) with Load Reduced DIMM (LRDIMM) memory.
- Flash Memory
- 4GB (Dual boot OS protection)
- Drive Bay
- 16 x 3.5-inch SAS 12Gb/s, backward-compatible to SAS 6Gb/s
- Drive Compatibility
- 3.5-inch bays: 3.5-inch SAS hard disk drives 2.5-inch SAS hard disk drives 2.5-inch dual-port U.3 NVMe SSD
- SSD Cache Acceleration Support
- L1 ARC Read Cache: RAM L2 ARC Read Cache: SSD ZIL Write Cache: NVRAM (C2F)
- Cache for Copy To Flash (C2F)
- 1 per each controller (64GB M.2 SSD)
- 2.5 Gigabit Ethernet Port (2.5G/1G/100M)
- 3 for each controller (assign one for remote management)
- 10 Gigabit Ethernet Port
- 4 x 10GbE SFP+ for each controller
- PCIe Slot
- 2 per controller Slot 1: PCIe Gen 3 x8 (CPU) Slot 2: PCIe Gen 3 x8 (CPU) Card dimensions for PCIe slot 1~Slot 2：215 x 68.9 x 18.76 mm / 8.46 x 2.71 x 0.74 inches. Wider cards can be installed if the next PCIe slot will not be used.
- USB 3.2 Gen 1 port
- 2 per each controller Note: The USB ports are for engineering purpose only. No external devices such as storage drives or UPS are supported.
- Form Factor
- 3U Rackmount
- LED Indicators
- System Power LED (Green): on/off System Status (Green/ Red): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection
- Buttons
- Power, Reset
- Dimensions (HxWxD)
- 5.2 × 17.57 × 23.14 inch
- Weight (Net)
- 52.51 lbs
- Weight (Gross)
- 76.35 lbs
- Operating Temperature
- 0 - 40 °C (32°F - 104°F)
- Storage Temperature
- -20 - 70°C (-4°F - 158°F)
- Relative Humidity
- 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
- Power Supply Unit
- Redundant/ Hot Swap Power Vin:90~264VAC;700W
- Power Consumption: Operating Mode, Typical
- 588.33 W Tested with drives fully populated.
- Fan
- Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)
- System Warning
- Buzzer
- Standard Warranty
- 5 Backup Battery Unit (BBU) carries a 1-year warranty.
- Max. Number of Concurrent Connections (CIFS) - with Max. Memory
- 10000
- Safety Standard
- FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD
